Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
Sim Micro Cannula
AspirationCannulaSteelSterile

Sim Micro Cannula

In order to comply with the existing EU regulations regarding product quality control, we kindly ask our customers who have used the above mentioned product to leave a feedback below. Your personal data will be processed according to our Privacy Policy that we assume you already have given your consent to. Any comment you leave below will not be visible publicly and will only be used for our internal quality management procedures. Thank you for your cooperation!

Sim Micro Cannula “SLOW REACTION”
Steel suction cannula complete with suction control handle

Characteristics

  • Aspiration control hole has a diameter of 1,5 mm., allowing the surgeon a slower aspiration response. Whenever the hole is opened the aspiration on the tip will slowly decrease. Even with a very high aspiration pressure the cannula makes only a low amount of noise.
  • Complete line and specials can be easily produced following your indications.
  • Rounded edges, atraumatic distal end of lumen.
  • Non blocking design.
  • Strong enough to use as a probe.
  • Cannulae are made of Steel AISI 304.
  • Single angle.
  • Internal diameter is uniform over the entire length of the cannula.
  • Suction control handle made of copolymer styrene-butadiene (ABS).
  • Matches all commonly used connection tubes.
  • Colour Code for prompt recognition.
  • Latex free.
  • Sterilised by gamma radiation. Single sterile blister packaging.

Sim Micro Cannula “SLOW REACTION” 90°L
Steel suction cannula rotate 90° to the left complete with suction control handle

Characteristics

  • Aspiration control hole has a diameter of 1,5 mm., allowing the surgeon a slower aspiration response. Whenever the hole is opened the aspiration on the tip will slowly decrease. Even with a very high aspiration pressure the cannula makes only a low amount of noise.
  • Complete line and specials can be easily produced following your indications.
  • Rounded edges, atraumatic distal end of lumen.
  • Non blocking design.
  • Strong enough to use as a probe.
  • Cannulae are made of Steel AISI 304.
  • Single angle.
  • Internal diameter is uniform over the entire length of the cannula.
  • Angle and rotate to 90° in relation to the handle to facilitate a lateral hold.
  • Suction control handle made of copolymer styrene-butadiene (ABS).
  • Matches all commonly used connection tubes.
  • Colour Code for prompt recognition.
  • Latex free.
  • Sterilised by gamma radiation. Single sterile blister packaging.

Sim Micro Cannula “SOFT TOUCH”
Steel suction cannula complete with suction control handle and atraumatic silicone tip

Characteristics

  • Complete line and specials can be easily produced following your indications.
  • Atraumatic silicone tip, made of “Medical Grade” silicone Shore 60.
  • Non blocking design.
  • Strong enough to use as a probe.
  • Cannulae are made of Steel AISI 304.
  • Single angle.
  • Internal diameter is uniform over the entire length of the cannula.
  • Suction control handle made of copolymer styrene-butadiene (ABS).
  • Matches all commonly used connection tubes.
  • Colour Code for prompt recognition.
  • Latex free.
  • Sterilised by gamma radiation. Single sterile blister packaging.

Sim Micro Cannula
PVC aspiration cannula complete with aspiration control handle

Characteristics

  • Particularly adapt for Neuro Surgery, ENT, Maxillo facial, dental surgeries and in general, Micro surgery.
  • Rounded, non-traumatic tips.
  • Cannulae are made of Medical PVC polyvinylchloride.
  • Double angle.
  • Internal diameter is uniform over the entire length of the cannula.
  • Aspiration control handle made of copolymer styrene-butadiene (ABS).
  • Colour Code for prompt recognition.
  • Latex free.
  • Sterilised by gamma radiation. Single sterile blister packaging.

Sim Micro Cannula for Microlaryngoscopy
Steel suction cannula complete with suction control handle

Characteristics

  • Aspiration control hole has a diameter of 1,5 mm., allowing the surgeon a slower aspiration response. Whenever the hole is opened the aspiration on the tip will slowly decrease. Even with a very high aspiration pressure the cannula makes only a low amount of noise.
  • Particularly recommended for DIRECT SUSPENSION MICROLARYNGOSCOPY.
  • Complete line and specials can be easily produced following your indications.
  • Rounded edges, atraumatic distal end of lumen.
  • Non blocking design.
  • Strong enough to use as a probe.
  • Cannulae are made of Steel AISI 304.
  • Single angle.
  • Internal diameter is uniform over the entire length of the cannula.
  • Suction control handle made of copolymer styrenebutadiene (ABS).
  • Matches all commonly used connection tubes.
  • Colour Code for prompt recognition.
  • Latex free.
  • Sterilised by gamma radiation. Single sterile packaging.